Only the simple and
the humble were abroad at that early hour: purveyors of food, in cheerfully
rattling carts, or hauling barrows with the help of grave and formidable dogs;
washers and cleaners at the doors of highly-decorated villas, amiably performing
their tasks while the mighty slept; fishermen and fat fisher-girls,
industriously repairing endless brown nets on the other side of the parapet of
the road; a postman and a little policeman; a porcelain mender, who practised
his trade under the shadow of the wall...
Arnold Bennett – Sacred and Profane Love (1905)
The photo shows a porcelain coffee pot made in Bristol in
the 1770s and as you see it is not quite in pristine condition. An old repair uses metal staples and wire inserted into holes drilled into the porcelain. Bennett’s
Italian porcelain mender would have employed the same technique.
I recall an expert telling us that the staples were inserted hot so
that when they cooled they contracted and clamped the pieces together. A skilled
job, especially when we consider that where staples were used in this piece, the holes were not drilled all
the way through even though the porcelain is very thin.
Missing bits appear to have been filled with plaster which you may be able to see in the right hand image just below the lid. These
old stapled repairs are quite common, especially for old Chinese porcelain. Presumably
the owners still wished to display the piece even though its value would be
much reduced. Was the servant responsible usually dismissed I wonder?
Today a restorer would take out the staples and begin all
over again with modern adhesives and resins. The repair would not be easy to
see without close inspection, as we discovered on a couple of occasions before we learned to be wary.
One way to tell is to lick suspect areas with the tip of the
tongue which is sensitive enough to detect slight temperature or texture differences
between porcelain and resin. The teeth are able to detect slight differences too. Any dealer will know what you are up to.
6 comments:
This could be a murder method in one of those classic detective novels....Poirot or Lord Peter Wimsey, probably the latter, realising that the repair joint had been coated with strychnine.
"Any dealer will know what you are up to"
Or they will know that you have read that spoof blog by "AKH" who often urges his readers to do daft things in to see if he can get a social trend started.
Apparently, back in the 1960s he started one about kicking the tyres of second-hand cars being a good way to estimate their value. Then there was "Have you tried switching the computer off and then on again?"
But do you leave your teeth in or take them out first?
Graeme - good idea, a neat way of doing in a porcelain collector.
Sam - have you tried getting rid of old tyres in the log-burner?
Demetrius - either, but use your own or it doesn't work.
With Sam Vega here. :)
James - :)
Post a Comment